Home Install Octoprint (Draft)

Install Octoprint (Draft)

  1. Download and install Balena Etcher: https://www.balena.io/etcher/
  2. Download Octoprint: https://octoprint.org/download/
  3. Extract Octoprint
  4. Insert a microsd card and adapter into your computer
  5. Open Balena etcher and flash Octpi.img file to microsd card
  6. Download Sublime: https://www.sublimetext.com/
  7. Open octopi-wpa-supplicant.txt in sublime text editor
    • uncomment the country you’re in
    • uncomment network and put in wifi SSID and Password in quotes
    • save txt file
  8. Put in microsd card in Raspberry Pi
  9. Take a microusb cable and plug one end into the Ender 3 and the other into the raspberry pi
  10. In the other USB port, plug your webcam into it
  11. Add a microusb power supply and plug into power port in raspberry pi
This post is licensed under CC BY 4.0 by the author.

Designing a DIY Pull up bar (Draft)

Install Raypier (Draft)